日本一区二区无卡高清视频_gogo欧美裸体艺术大胆_又爽又黄无遮挡高潮视频网站_热99re久久精品天堂

Experienced Product Engineer for new product development of high speed mixed-signal IC from initial objective spec to mass production. Works including test solution development, product characterization and qualification, yield enhancement, issues related to production solving and continuously quality improvement. 產品工程師，負責高速混合信號IC的新產品開發，從最初的目標規格到大規模生產。工作內容包括測試計劃設計、產品特性化表征和可靠性鑒定、產品良率的提升、生產相關的各類問題的解決以及持續的質量改進。

RESPONSIBILITIES:

1. Co-work with design engineer and test engineer to develop product test plan/solutions of new high speed product;

協同IC設計和測試工程師制定高速產品的測試計劃和測試方案；

2. Support product characterization and qualification: Characterization/Correlation/ESD/LU/Reliability Qual. and continuously enhance yield and improve quality of devices in mass production.

產品的特性化驗證和可靠性鑒定（完整的特性化表征/測試驗證/靜電測試/栓鎖測試/可靠性鑒定等），并持續維護、提高產品批量生產的良率和質量；

3. Collaborate with internal team for engineering sample support and delivery.

協同內部團隊，確保工程樣品的按時交付；

4. Engage in solving all issues meet internal or external to improve the product quality across the product lifetime.

介入解決產品生命周期中面臨的各種內部或外部問題，以提升產品質量；

5. Support on products/process subcon (fab/bumping/assembly/test.etc) transfer.

參與支持產品/制程的外包遷移(晶圓代工/凸點代工/封裝/測試等)

1. Master degree in Electronics/Electrical Engineering; Bachelor degree with 5 years’ experience in job offered or related position also
accepted;

電子工程相關專業畢業的碩士研究生，或擁有5年以上同等崗位的本科生；

2. NPI experience of high-speed IC such as SerDes/DDR/PCIE and digital-analog mixed chip and SOC chip is specially preferred.

具有高速產品諸如SerDes/DDR/PCIE和數?；旌蟂OC的開發經驗者優先；

3. Familiar with high speed and mixed signal SOC product characterization
and qualification (Characterization/Correlation/ESD/LU/Reliability);

熟悉高速和混合信號SOC產品的特性化驗證和可靠性鑒定，包含特性化驗證、測試比對、靜電測試、栓鎖測試、可靠性測試等；

4. Familiar with ATE testing, processing DFT/DFM and data analysis ability is necessary;

熟悉ATE測試，有DFT/DFM和數據處理分析的經驗；

5. Process a good sense of responsibility and positive working attitude;

良好的責任心和積極向上的工作態度；

6. Experience of low yield analysis and quality issue solving for new products;

具備低良率數據分析和質量相關問題的處理經驗；

7. Experience of managing sub-contractors at different locations.

具備與各地外包商協作的經驗；

8. Proficient in the use of various test instruments, including but not limited to high-speed oscilloscopes, logic analyzers, etc.

精通各測試儀器的使用，包括但不限于高速示波器、邏輯分析儀等；

9. Good communication and teamwork skills;

具備良好的溝通技巧和團隊精神；

10. Good English reading, writing, listening, and speaking skills, CET-4 is a must, CET-6 or above is preferred.

具備良好的英語聽、說、讀、寫能力，需通過大學英語四級，通過大學英語六級者優先。